All of our products are galvanized (layer of zinc applied to the surface by hot dipping) to maximize corrosion resistance in nominal atmospheric environments. The hot dip galvanisation applied in accordance with BS EN ISO 1461:2009 hot dip galvanised coatings on fabricated iron and steel articles. Specifications and test methods.

Material: Galvanised Mild Steel
Width: 1.5m Canopy 1.4m between brackets
Height: 1.0m
Depth: 0.5m
Mass: xxKg

1 x Door canopy
4 x Fixings
1 x Installation guide

Painted in two pack paint.
Lead flashing - recommended if the wall surface is uneven. Installing the lead flashing will achieve a watertight finish.

Please be sure to select the correct size door canopy by following this simple measurement guide.

Using a conventional tape measure, take the doorframe width measurement at the top or near to the top of the door. Then add a recommended 400mm (200mm each side) to this distance. The appropriate canopy should then be selected (canopy width must be greater than your measurement).

The area above the door must also be considered and measured to ensure there’s sufficient space for the door canopy to be installed. Its recommended to have at least 600mm available above the door frame.

Note: do not measure the width of the door. You must measure the width of the doorframe i.e. wall to wall to ensure a correct installation.

If you have any uncertainty or difficulties taking these measurements, then please get in touch

Each of our items will be delivered with an installation instruction detailing the applicable Tooling, Parts and Materials and Procedure to successfully install each door canopy. You do not need any particular qualifications, each canopy is delivered complete and shall not require any pre-assembly tasks.

If you are interested to find out more, then please get in touch

Each of our products are galvanised as standard that allows us to offer a no quibble 5 Year warranty. If you're not satisfied with the item, we shall replace the faulty product with a like for like item.